General Description
PHFL Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body have two types: melt-blown and pleated. And pleated filter is divided into two forms: standard and crescent-shaped. End caps and filter layer using hot-melt welding, no bonding agent, with a wide range of chemical compatibility, can be applied to various fields.
Application:
General Purpose: RO Prefiltration, all kinds process water purification
Industrial: Process fluid, process water, condensed water, coolant, wastewater treatment;
Food and Beverage: Process water;
Petrochemical：Various solvents, chilled water, brine filtration
Power Plant: Supplementary water, condensation water, coolant
Product Features:
*Single cartridge could achieve flow rate 110m3/h
*Filtration systems are 50% smaller than typical size system
*Inside to outside flow direction keeps all of the contamination catched.
Performance Specifications
Dimensions(nominal)
|
OD
|
6” (152mm)
|
|
Length
|
20"/40"/60"
|
Material of Construction:
|
Model
|
Filter Media
|
Support/Drainage
|
End Caps
|
Seals Material
|
|
PP
|
Pleated Depth Polypropylene
|
Polypropylene
|
Glass Fiber Reinforced Polypropylene
|
NBR、EPDM、Viton
|
|
Melt blown Polypropylene
|
|
Glass Fiber Reinforced Polypropylene
|
|
GF
|
Glass Fiber/Polyester
|
Polyester
|
Glass Fiber Reinforced Polypropylene
|
Filter Performance
|
Micron
|
0.1μm, 0.5μm, 1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm
|
|
Maximum operating temperature:
|
Pleated/melt-blown pp: 82℃
|
|
Pleated glass fiber: 121℃
|
|
Maximum operating differential pressure
(Inside to outside flow direction)
|
Pleated/melt-blown pp: 3.44bar@82℃
|
|
Pleated glass fiber: 3.44bar@121℃
|
|
Suggestion pressure for filter replacement
|
2.5Bar@20℃
|
|
Suggestion design flow
|
40": ≤15m3/h
|
|
60": ≤25m3/h
|
