Product Description

General Description

PHFL Series High Flow Filter Cartridge is made of diameter 6"(152mm), single open end, without inner core, inside to outside flow direction. Filter body have two types: melt-blown and pleated. And pleated filter is divided into two forms: standard and crescent-shaped. End caps and filter layer using hot-melt welding, no bonding agent, with a wide range of chemical compatibility, can be applied to various fields.

 

Application:

General Purpose: RO Prefiltration, all kinds process water purification

Industrial: Process fluid, process water, condensed water, coolant, wastewater treatment;

Food and Beverage: Process water;

Petrochemical：Various solvents, chilled water, brine filtration

Power Plant: Supplementary water, condensation water, coolant

 

Product Features:

*Single cartridge could achieve flow rate 110m3/h

*Filtration systems are 50% smaller than typical size system

*Inside to outside flow direction keeps all of the contamination catched.

 

Performance Specifications

 

Dimensions(nominal)

OD	6” (152mm)
Length	20"/40"/60"

 

Material of Construction:

Model	Filter Media	Support/Drainage	End Caps	Seals Material
PP	Pleated Depth Polypropylene	Polypropylene	Glass Fiber Reinforced Polypropylene	NBR、EPDM、Viton
	Melt blown Polypropylene		Glass Fiber Reinforced Polypropylene
GF	Glass Fiber/Polyester	Polyester	Glass Fiber Reinforced Polypropylene

 

Filter Performance

Micron	0.1μm, 0.5μm, 1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm
Maximum operating temperature:	Pleated/melt-blown pp: 82℃
	Pleated glass fiber: 121℃
Maximum operating differential pressure (Inside to outside flow direction)	Pleated/melt-blown pp: 3.44bar@82℃
	Pleated glass fiber: 3.44bar@121℃
Suggestion pressure for filter replacement	2.5Bar@20℃
Suggestion design flow	40": ≤15m3/h
	60": ≤25m3/h

Payment Terms︰ TT/ Western Union/DP/DA/LC

Product Image