General Description
PHFK Series High Flow Filter Cartridge is made of diameter 6" and pleated design, with high-strength pp center core, outside to inside flow direction. Outer cage have two types: integral pp cage and polyester mesh.
Application:
● RO pre-filtration, desalination pretreatment and a variety of process water filtration;
● Power plant supplementary water, condensation water, coolant filtration;
● Biopharmaceutical industry pharmaceutical raw materials, solvents, water filtration;
● Petrochemical industry various solvents, quench water, brine and other chemicals filtration.
Performance Specifications:
Dimensions(nominal):
|
OD
|
6" (152mm)
|
|
Length
|
6" (152mm)
|
Material of Construction:
|
Model
|
Filter Media
|
Support/Drainage
|
End Caps
|
Seals Material
|
|
PP
|
Deep Pleated Polypropylene
|
Polypropylene
|
Glass Fiber Reinforced Polypropylene
|
NBR, EPDM, Viton
|
|
GF
|
Glass fiber/polyester
|
Polyester
|
Glass Fiber Reinforced Polypropylene
|
Filter Performance
|
Micron
|
1μm, 5μm, 10μm, 15μm , 20μm, 40μm, 70μm
|
|
Maximum operating temperature
|
Pleated Glass Fiber: 121℃
|
|
Pleated Polypropylene: 82℃
|
|
Maximum operating differential pressure
|
Pleated Glass Fiber: 3.44bar@121℃
|
|
Pleated Polypropylene: 3.44bar@82℃
|
|
Suggestion pressure for filter replacement
|
2.5Bar@20℃
|
|
Suggestion Max. flow rate
|
40" filter 70m3/h
|
