General Description
PHFM High Flow Filter Cartridge is made of diameter 6.5" and pleated design with big flow area and dirt holding capacity. It can meet different flow requirements, with a wide range of chemical compatibility, can be applied to various fields.
Application:
RO pre-filtration, desalination pretreatment;
Power plant condensation water filtration;
Biopharmaceutical industry pharmaceutical raw materials, solvents, water filtration;
Food and Beverage process water treatment;
Performance Specifications
Dimensions(nominal)
|
OD
|
6.5" (165mm)
|
|
Length
|
20",40", 60"
|
Material of Construction:
|
Model
|
Filter Media
|
Support/Drainage
|
End Caps
|
Seals Material
|
|
PP
|
Deep pleated Polypropylene
|
Polypropylene
|
Glass Fiber Reinforced Polypropylene
|
NBR, EPDM, Viton
|
|
GF
|
Glass fiber/polyester
|
Polyester
|
Glass Fiber Reinforced Polypropylene
|
Filter Performance
|
Micron
|
1μm, 3μm, 5μm, 10μm , 15μm, 20μm, 50μm, 70μm
|
|
Maximum operating temperature
|
82℃
|
|
Maximum operating differential pressure
|
3.44bar@82℃
|
|
Suggestion pressure for filter replacement
|
2.5Bar@20℃
|
|
Suggestion Max. flow rate
|
20": 35m3/h
|
|
40": 70 m3/h
|
|
60": 110 m3/h
|
