General Description
PLZ Series Pleated Filter Cartridge is constructed of superfine pp(polypropylene) and imported woven or mesh support materials, providing micron rating from 0.1µm to 60µm. Has high and stable filtration efficiency, can be used for various demanding filtering environment.
PLZ Series Pleated Filter Cartridge is divided into PLZ-Ⅰ(general frame) and PLZ-Ⅱ(integral frame). The PLZ-Ⅱ with integral frame, has big filtration area, long life, high strength, dimensional stability, small leakage risk, etc.
Application:
General purpose: RO Prefiltration, all kinds process water purification;
Industrial: Water pretreatment of power plant, deionized water pre-filtration, and filtration of plating solution
Food and Beverage: Alcohol, Beverage, Pure water.
Chemical / petrochemical: Filtration of various acids, alkalis, solvents and kinds of chemicals;
Biopharmaceutical: Filtration of pharmaceutical, biotechnology and plasma products.
Featuresand Benefits:
1. Excellent Chemical compatibility, high flow, low differential pressure, long service life;
2. Depth pleated membrane, can meet various application areas;
3. Graded pore density provide high dirt holding capacity;
4. Common cleaning methods available, or use high-pressure disinfection cabinet and steam sterilization;
5. Absolute rating, bubble point test compliance with GMP certification;
Specifications
|
Item
|
Technical Parameters
|
|
Micron(µm )
|
0.1, 0.22, 0.45, 1, 2, 3, 5, 10, 20, 30, 60
|
|
Filtration area
|
0.4-0.7m²
|
|
Outside diameter
|
68.5mm
|
|
Maximum operating differential pressure
|
ΔP≤0.35MPa at25℃
|
|
Maximum operating differential pressure (reverse direction)
|
ΔP≤0.28MPa at60℃
|
|
Maximum operating temperature
|
80℃（Stainless steel support is recommended for temperature exceeds 50℃）
|
|
Sterilization temperature
|
30 minute cycles @121℃
|
|
Water flow rate
|
Please refer to “Rating Curve”
|
|
Chemical compatibility
|
Please refer to "The chemical compatibility table"
|
Material structure
|
Filter Media
|
Polypropylene
|
|
Support/Drainage
|
Polypropylene
|
|
Core/Cage/End Cap
|
Polypropylene
|
|
Seals
|
Please refer to “Ordering Information”
|
Performance
|
Maximum operating temperature
|
80℃
|
|
Maximum operating pressure
|
4bar/21℃
|
|
2.4bar/80℃
|
|
Mosit-heat sterilization
|
121℃/30min
|
|
Flowing hot water sterilization
|
85℃/30min
|
